For our Hi-Fi devices, we have created a series of high-quality cables that are an integral part of every audio chain and have a significant impact on the music reproduction experience.

For this cable, we use a special alloy of copper, gold and silver in a precisely defined ratio. This ratio was determined by demanding listening tests. Wherever you use this material in the audio chain, it will positively affect the listening experience. The resulting sound could be defined as calm, transparent and structured down to the smallest detail. The insulation consists of Teflon and flexible plasticized PVC. This cable has a solid core, which results in less signal degradation, but it must be expected to be more difficult to bend.

We used high-quality Viborg connectors on our CBL XLR 1a. They are made of OFC copper coated with gold and silver. The insulation is Teflon.

The connectors are soldered to the cable with high-quality lead-free solder from Mundorf with a 10% pure silver content.

Our products are not mass-produced on a line. Each original piece is assembled piece by piece by our hands. Each electronic component is tested and measured before installation. After assembly, a comprehensive functional test and parameter measurement follow. Finally, each product is tested in our listening room to make sure that everything is as it should be.